7015D matt medium gray
Category
New product
Tel:158-9572-3106
7015D matt medium gray
Product description
(1) In order to give full play to the characteristics of powder coating and prolong the service life of the coating film.
(2) When spraying, the object to be coated must be completely grounded to increase the spraying efficiency of powder coating.
(3) Immediately inspect after powder spraying. If defects are found, they should be disposed of in time. If defects are found after curing, the scope is small and only part of it will not be affected. The surface of the coated object can be decorated with the same color powder and acetone to be diluted and then repaired. If the scope is large If it affects the appearance quality, after sanding it, spray it again or remove the coating with a paint remover, and then re-powder.
(4) The recovered powder must be selected to remove the sundries, and then mixed with the new powder in a certain proportion.
2. Construction requirements for fine art powder spraying: fine art powder has the characteristics of beautiful appearance, strong sense of plane, good decorative effect, etc., but it has strict requirements on its construction process.
(1) The input air pressure should not be too large when spraying powder, and it is generally better to control it at 0.5-1.5kg/cm2. Too much air pressure will result in poor pattern clarity or some pitting. The electrostatic voltage should not be too high, generally controlled at around 60-70Kv. If the voltage is too high, the powder attached to the surface of the workpiece will rebound and appear pitted. Defects such as poor leveling.
Previous
9005 black sand pattern
Next
7037 Matt light gray
Keyword:
gray
the
powder
be
of
to
and
it
if
in
PRODUCT
Yangzhou Jinmao Powder Coating Co., Ltd.
Tel:
Add:
South District, Xiaoji Industrial Park, Jiangdu District, Yangzhou City, Jiangsu Province
Copyright © 2022 Yangzhou Jinmao Powder Coating Co., Ltd. 苏ICP备2021052175号-2 SEO